The PIXCI® E4DB frame grabber connects two Base camera link cameras to the PCI Express bus. The PIXCI E4DB is handled by EPIX’ software as if two PIXCI E4 boards are installed. The E4DB will accept two trigger signals — one for each camera; or allows a single trigger to control capture from both cameras. A strobe output signal is generated for each trigger. The PIXCI E4DB frame grabber supports two cameras with a combined sustained bandwidth up to 700 MB/second. Compatible with the PCI Express x4 bus, the PIXCI E4DB frame grabber interfaces to more than 100 of the newest, most advanced, highest bandwidth machine vision cameras available.
The PIXCI E4DB and XCAP offers:
■1 GB/sec burst data transfer rate.
■Up to 700 MB/sec sustained data transfer from cameras to x4 PCI Express bus.
■Two Camera Control Dialogs - independent or shared – exposure, bit depth, gain, frame rate, etc.
■Free -run mode for maximum frame rate sequence capture.
■ Control mode for triggered image capture